Recuperma‘s RECU S is the scrap shear for demanding tasks.
Due to the torsion-resistant welded and threaded construction, the power flux is ideally derived along the machine into the foundation. The shaft guidance is robust and works powerfully, effectively and precisely. It is exactly for this reason that column-guided punches and presses have been used in automobile pressing plants exclusively.
The three-dimensional pre-compressor perfectly prepares the scrap for the actual shearing process, whereby the concomitant overstroke ensures the resulting cutting efficiency.
The hydraulic pump system of the RECU S was perfectly tuned to the shearing process through a lot of research and development work.
Peak currents are prevented by an intelligent control so that high pressure surges and the typical “bang” are a thing of the past. The hydraulic oil is filtered twice at Recuperma. The entire oil quantity is generally forwarded through a return filter. A quantity of 10 % to 20 % is additionally filtered in a bypass flow. This reduces the pollution in the oil significantly and the service life of the individual hydraulic aggregates, such as pumps, for example, is substantially increased.
All the cylinders are equipped with an interior path measurement and a special sealing system of the state of the art. This increases both the piston speed and the service life to a maximum.
The possibility of a remote maintenance saves time and costs in case of control issues, as solutions can directly be found at the Recuperma head office in Castrop-Rauxel.
|Model RECU S||RECU|
|Cutting force [kN]||5500||6750||2 x 3950||2 x 5500||2 x 6750|
|Box lenght [mm]||5000||5000 / 6000||6000||7500||7500|
|Box width [mm]||2000||2000||2000||2500||2500|
|Box height [mm]||1500||1500||1500||1800||1800|
|Cutting width [mm]||700||700 / 950||950||950||1250|
|Pusher height [mm]||600||600||600||800||800|
|Total length ca. [mm]||13000||13000 / 15000||15000||20000||20000|
|Total height ca. [mm]||4500||4600||5000||6700||6800|
|Totel width ca. [mm]||7500||7500||7500||9000||9000|
|Force clamp [kN]||2000||2800||2800||2 x 2000||2 x 2800|
|Force pusher [kN]||2000||2000||2000||2800||2800|
|Force side compression [kN]||2 x 1500||2 x 2000||2 x 2000||2 x 2800||2 x 2800|
|Force lid [kN]||2 x 1500||2 x 2000||2 x 2000||2 x 2800||2 x 2800|
|Main driver [kW]||3 x 90||4 x 90||4 x 90||5 x 90||7 x 90|
|Total weight ca. [t]||200||200 / 220||260||280||330|